PDF labels of this kit can be found
From David of Fresno, California on 9/1/2012.
This is a great summer beer! I'll definitely make it again!!!
From Gary of Ferndale, Washington on 7/27/2012.
I am new to brewing beer although I have extensive experience making wine and cider. This is my 2nd beer. The 1st was HH's Diamond Knot's IPA. Like the IPA kit, the instructions were very easy to follow. . . .
From Rick of Chicago, Illinois on 2/5/2011.
This was my first batch I ever made. Was nervous going into it, but it came out great. So great that I couldn't stop my buddies from drinking it!!! On to the next
Great Summer Beer
From Michael Powell of Sandy, Oregon on 8/31/2009.
Great Wheat beer for a hot summer day. Turned out great, everyone loves it.
First Batch came out Perfect!
From steve sawyer of aurora, Colorado on 5/15/2008.
My first batch came out Great ten days total ferment, (20 hours to carbonate in keg at 35psi chilled ) and drop down to 10 psi and ready to drink!
Wizard Wheat : Nice and clean
From Ed Williams of Colorado Springs, Colorado on 4/28/2008.
I love wheat beers. I purchased this kit with the recommended liquid yeast, and I also used DME to carbonate it at bottling. I probably wouldn't do the DME at bottling again on this particular batch . . .
From Anonymous of Reno, Nevada on 4/25/2008.
I brewed a batch of this beer using the dry yeast included in the package. The starting gravity was 1.050, three days later it was down to 1.010. I kegged the beer and tested it again 5 days later, and . . .
First brew turned out great!
From David M of huntsville, Alabama on 3/6/2008.
Wow. Made this as my first brew. Ready to drink in 3-4 weeks. Used the smak pak yeast. Bubbled furriously for about 1.5 weeks. Force carbonated in a corny keg and it lasted only a cpl of weeks. Neighbors . . .
From Jason of Jacksonville, Florida on 2/23/2008.
This is a great Wheat Beer! I added a little over a pound of honey into the primary after fermentation really got going. 6 hours later I heard a noise from my closet and found that my airlock had become . . .
From Darryl Stonecypher of Johnstown, Pennsylvania on 1/27/2008.
This was my first batch of home brew. After being stationed in germeny for several years back in the 80's I have dreamed of drinking just one more hefe with the great german taste. This is the beer... . . .
A real treat
From Kenneth Mayer of Cameron Park, California on 11/7/2007.
Your in for a exceptional treat. Buy the Wyeast #3068 it is well worth the few extra dollars. This will give the true German hefeweizen taste to your brew.
From Dave Banker of Flora, Illinois on 6/10/2007.
This is the best that we have brewed so far. Very drinkable and even my wife likes it. I think I'll try it again with honey or brown sugar added,to up the alcohol level a bit.
This is a KEEPER!
From Ed Jaro of Raeford, North Carolina on 10/17/2006.
I will definitely be making more of this one! This one beats the local microbrewery and imports by a long shot. I will be trying adding some fruit flavoring next :)
From Jeff Gricewich of Visalia, California on 7/14/2006.
This was the first beer i ever brewed...it came out great!!! Inexpensive, and from what I've been told, hard to screw up, it might be the best kit for beginners. I hadn't started keeping notes on my brews . . .
From Joseph G Leiby of Fremont, Ohio on 5/30/2006.
This was my first try at home brewing and I am extremely pleased with the results. It goes down smooth and tastes great. My friends love it.
Good beer to drink early
From Michelle of Pensacola, Florida on 5/21/2006.
Great freshing beer. The Wyeast really made the difference. Almost tasted like a belgium wit beer. The first few weeks really crisp and refreshing, however, as it ages seems to take on a sweeter, less . . .
I CAN'T TELL YA!!!
From Michael C. DeStories of Wantage, New Jersey on 3/23/2006.
This beer kit was the first brew I ever brewed and when it came time for the first taste, boy was I sorry I made SO MANY PROMISES to my friends! It is and will be an awesome summer brew! I just ordered . . .
This beer goes with everything
From EricM of Dickinson, North Dakota on 2/6/2006.
I have brewed this beer five or six times. It is a perfect beer for friends that think Coors is a little too dark. Excellent for adding a fruit extract to also.
From Nat Reeder of North Augusta, South Carolina on 9/28/2005.
Great kit! I added 2lbs of Honey at the end of the boil, left great a great lighter color and a little extra kick:) A crowd favorite.
Love that wheat beer.
From Travis Ball of Half Moon Bay, California on 6/14/2005.
I took a bottle of this beer to our local brew master and he gave me very high marks. Tasted as good as his.
From Jeffrey of Rochester, New York on 6/7/2005.
First-time homebrewer and it turned out great! The instructions make it virtually foolproof. An awesome introduction to beermaking that has me hooked. I'll definitely be making more!
Make more kits!
From Travis Ball of Half Moon Bay, California on 4/10/2005.
Like you say, put in a slice of lemon , that really makes it. When will you have more kits? I need another .*****Editor's Note:They are now back in stock!
From Mike of Marysville, Washington on 3/11/2005.
Awesome 1st batch. Will definitely do another batch!
Killer first brew
From Calvin Lindsey of Mission Viejo, California on 2/23/2005.
This was the first brew my wife and I did. She really likes hefe's and she love this brew. We used the 3068 yeast and a pound of honey at the end of boil and it came out great. The only problem is it . . .
From Doug Sharp of Pagosa Springs, Colorado on 9/15/2004.
Amazing!! I won first place in the county fair and first place in the State Fair with this beer. I only started brewing this year and do everything wrong and it still comes out good. I do use the reccommended . . .
From Doug Sharp of Pagosa Springs, Colorado on 7/14/2004.
I made this beer using the added yeast and from Montana to Arizona my friends say this is one of the best wheat beers they have ever tasted.I'm ordering another kit and entering it into both the local . . .
Very Good with Yeast Upgrade
From C. Carpenter of Bothell, Washington on 11/22/2003.
I usually like to go mad scientist and buy every ingredient seperately, but something inside of me clicked when I saw the box of Wizard Wheat. The staff was excellent in recommending the American Wheat . . .
From Dan of Sunnyvale, California on 5/12/2003.
My wife and I were finally able to sample this wonderful hefeweizen yesterday. We were both blown away. Top notch! I added a pound of honey at the end of the boil and the results were fantastic. Doing . . .
12/15/2012 -- I'm looking to buy your Deluxe kit for my son for Christmas, and he'll need a brewpot. What's the advantage to having a spigot? I don't want to buy him junk, and none of us has ever brewed our own beer before. Aside from the brewpot and bottles, what else would he need to get started?
Response From Homebrew Heaven: Our Equipment Kits are really quite complete. As you say, a large brewpot is necessay, as well as bottles. A spigot in the brewpot is a "convenience" type of product. It just make the job easier than lifting up a hot, heavy brewpot. A 5 gallon batch of beer weighs more than 40 lbs. Just opening a drain valve (spigot) makes the job easier . . .
5/2/2012 -- I am new to this brewing my own beer soda & wine. Your kits only have the brewing tools & not the mixing ingredients right?
Response From Homebrew Heaven: Welcome to our hobby/obsession!Yes, we sell the brewing equipment kits (tools) separately from the ingredients for making beer/wine/sodas. The Equipment Kits are a one time purchase, and you can choose the type of beer you like from our Ingredient Kits. We put together about 15 different recipe kits that get you started in the right way. . . .
9/6/2011 -- Are you going to offer the hop goblin kits this year? If so, when will they be available for purchase?
Response From Homebrew Heaven: Absolutely! This popular seasonal kit will be available on October 1st! (to brew in time for Halloween)-NOW AVAILABLE!
5/17/2010 -- what is your phone number?
Response From Homebrew Heaven: We can be reached at (425) 355-8865Our toll free order is (800) 850-2739
3/15/2010 -- I just brewed Wizard Wheat. The yeast took right off... about 3 hours after pitching. (That is a record for my homebrews.) My question is this: Do I need to put the wheat beer in a secondary fermentor? I want the beer to be cloudy and I usually don't put my ales or lagers in the secondary fermentor. Is a wheat beer any different? Is the . . .
Response From Homebrew Heaven: Wheat beers are no different to ales or lagers in that respect. You WILL however, have more cloudiness due to the proteins in the wheat. In time that can settle to the bottom of your bottles. If you prefer a more clear beer, carefully pour off your beer. If you prefer a cloudy wheat beer, gently swirl your beer to pick up that sediment, and . . .
2/18/2010 -- I have my stout in the primary, just about to transfer to the secondary. I added oats to the boil and am thinking about putting some coffee and a vanilla bean into the secondary. What would be the best way to do this and do you think it would be too much??
Response From Homebrew Heaven: The best way to add coffee is to brew some up, and use that in place of water in your fermenter. If your beer needs a little "topping up" you could still do that.Vanilla is easily added by throwing the whole bean into the seconday fermenter for about 1-2 weeks.All these additions sound good, but it's probably best to just go with one . . .
1/8/2010 -- I am currently brewing my first batch of beer --wizard's wheat- and I have a question about adding honey. I see that it's OK to add during the boil and in the primary fermentor, but I'm ready to move it to the secondary because it's been about 3 days and the bubbles are few and far between. Is it still OK to add honey at this stage? If so . . .
Response From Homebrew Heaven: Yes, you can still add honey BUT remember...you are adding more fermentable sugars (in the honey) and they will require more time to ferment out. This causes more bubbling and sediment as well, and prolongs the time before you can drink your beer.
12/9/2009 -- I saw this question asked somewhere on your site but after searching for it again, I cannot find it. In the suggestions for the St Peters Pilsner, you say adding a lb. of honey to the last 2 minutes of the boil will add flavor and increase alcohol content. Can you do this with any of the kits (specifically the Wizards Wheat), or just the . . .
Response From Homebrew Heaven: Yes, you can do this with any of the kits. The Wizard's Wheat would be especially good. 1 lb of honey in a 5 gallon batch will raise the alcohol content by about 1% by volume. Don't expect sweetness, the honey will (slowly) be converted to alcohol. We don't recommend adding more than 1.5 to 2 lbs, or it starts to detract from the beer.Many . . .
9/3/2009 -- Is it possible to hop a bock beer more to give it a more balanced taste? and if so which hops would give such a end result? P.S. not a computer savvy guy, e-mail address is my wife cut me some slack on the name.
Response From Homebrew Heaven: Yes, it IS possible to add more hops to a bock. Add perhaps 1 oz of a good nobel hop to the boil, such as Hallertaur, Saaz or Tettnanger. Those are traditional "aroma" hops, but will also add some balancing bitterness. Yum!Hah! Are you sure you want your WIFE learning about your beer brewing? Mine woulld just roll her eyes, but...
8/20/2009 -- I just got back from a trip to Evensville, where my brother in law took to me to a brewery. He got me to try a Hefeweizen. While i am more of a liquor man,i can now say i love a beer.I would like to come as close to this as i can.It was a very cloudy "unfiltered" spicy and slightly fruity beer.I am going to purchase the Wizards Wheat with . . .
Response From Homebrew Heaven: Good! As we say, there is a beer for everyone. A tasty Hefeweisen is truly one of summer's pleasures.1) Force carbonating a hefe is just fine. No different that bottling as far as taste is concerned. If some yeast falls out of suspension, it is easy to invert the keg (or bottle) to put more yeast flavor (and cloudiness) into your beer.2) . . .
8/1/2009 -- I just finished my first batch of wheat beer and have transfered it to the primary, it's been about 28 hours and i've only noticed about 1 bubble per minute in the airlock. Is the yeast doing it's job or should I add another packet? Also a solid layer of sludge has formed on the surface of the beer, is this normal? Cheers!
Response From Homebrew Heaven: Yes, it is working. No, it doesn't need any additional yeast, and yes, the layer on top is entirely normal.Hang in there and enjoy!
7/5/2009 -- I just put my Wizard Wheat in the primary fermentor. I really like the cloudy/unfilterd type Hefe's, will the original procedures make it this way or is there anything type modification I can do to make it more like a unfiltered style?
Response From Homebrew Heaven: It will be somewhat cloudy...wheat does that to a beer. If you did NOT use the irish moss clarifier, that would add a little more. Some yeasts "attenuate" more than others as well. If you use the Wyeast #3068, that typically leaves a beer more cloudy.
5/28/2009 -- I am wondering which of the yeasts to use in order make a Hefeweizen similar to Widmer or one of the other NW Hefs
Response From Homebrew Heaven: For a true German style, I would go with the Wyeast #3068. For an American style hefe (like Widmer), either the #3056 or #1010 would work well.
11/19/2008 -- I'm interested in buying the Wizard Wheat but I have a question being that it will be only my 3rd batch ever made. It is suggested to get the 3068 yeast for a more german style taste. My question is do i add the 3068 yeast in addition to the yeast that comes with the kit or do i substitute it in place of?
Response From Homebrew Heaven: All of our Homebrew Heaven recipe kits are sent with a packet of dry yeast. If you order the #3068 liquid yeast with the kit, I would use just that. Save the dry yeast for another batch! Why not?
11/18/2008 -- I brewed up two recipes the diamond knot IPA and the Wizard Wheat. For the Diamond Knot, I used the 1028 London Ale Yeast.My starting gravities 1.062 6 days later transferred to a secondary with readings of 1.020. I added about 1/2 a gallon of water and am getting the 1 bubble/3min mark about 6 days later took gravities and am at 1.010 . . .
Response From Homebrew Heaven: Yes, your Diamond Knot is ready to bottle. Time doesn't mean a thing, hydrometer readings do. There is absolutely NO harm, however, in letting it wait a while longer if you like. It's just getting better.Yes, your Wizard is also ready to bottle if you like. As I say, hydrometers don't lie. If you want additional clarity, then I would say . . .
9/7/2008 -- I am a big fan of your ingredient kits but have noticed that the selection has been very low lately. Why are some of your best ingredient kits no longer available?
Response From Homebrew Heaven: We are big fans too! We even like selling them...The real problem is product availability. There is currently a worldwide HOP shortage, believe it or not, and getting the proper varieties in the quantities that we need has been a real challenge. We're hoping the situation will resolve itself by the end of the year, but it may not. Big . . .
7/13/2008 -- I recently brewed a batch of Wizard's Wheat. Now I have 2 questions. 1) When I did the yeast (Wyeast 3068), i broke the inner pouch, but didn't wait at all to add. Is this ok? The ending specific gravity is 1.010. 2) I've been super busy and left the batch in the secondary fermenter for almost 2 months now. It appears to have white dots . . .
Response From Homebrew Heaven: 1) Yes, it obviously did work, because your beer fermented out all the way. Your ending specific gravity tells me this.2) The white dots are likely harmless. When you go to bottle your beer, simply siphon from the bottom into another container, carefully avoiding those "dots". Then add the priming sugar and bottle away. I'm betting it will . . .
5/13/2008 -- i have try three batchs of extact they didnt come out so good. i would like to use all dme. i plan on makeing a wheat ale. i saw the wheat and barey mix dme you have. can i brew just that dme with sp grains and hops to make a 5 gallon batch? i believe that they didnt come out so good because of old self life and bad yeast (from another shop). . . .
Response From Homebrew Heaven: Yes, you can use our wheat/barley mix DME to make a nice batch of wheat ale. We have no idea why you have had problems in the past. I will say, however, that it takes quality ingredients to make a quality beer. Old, expired ingredients are sometimes sold my other shops. Not us.I'd like to recommend out Wizard's Wheat (recipe) Kit. . . .
4/29/2008 -- I would like to make a blueberry beer for this summer and was thinking I would use to West Coast Blonde kit to do so. Do you recommend any other kit to use? I have been researching the best way to make a blueberry beer and have come across a couple different variations as to when to add the blueberries during the process. Do you have any . . .
Response From Homebrew Heaven: Yes, our West Coast Blonde Kit would be an excellent base for a fruit beer. If you like wheat beers, our Wizard's Wheat is also a nice choice.As far as fruit flavors, there are really two options for making a fruit beer: artificial flavorings and natural fruit. Using artificial flavorings is actually a pretty good way to go. They are . . .
4/27/2008 -- what are the pros and cons of the dry yeast included in your ingredient kits vs the optional wet yeast culture? i'm especially interested in whether one produces more alcohol over the other and viability of the yeasts after shipping, and i welcome any other info you care to share.
Response From Homebrew Heaven: Both dry yeasts and liquid yeast cultures are excellent products. Generally speaking, you would use a liquid yeast culture if you are trying to replicate a particular style (or brand) of beer. This is especially so with specialty beers, like hefeweizens, bocks, or lambics for instance. To give all the pro/cons for all styles would be a huge . . .
3/18/2008 -- Looking to brew a couple batches of homebrew towards the end of the month and we have some questions for you. First - we have 2 carboys and 2 airlocks and wondering if that is all we would need to brew 2 batches. Second- if we use the wizard wheat to create a hefeweizen and we wanted it to be either lemony like a summer shandy from leinemkugels . . .
Response From Homebrew Heaven: Not sure on the first question...that isn't much to go on. What ELSE do you have in the way of equipmment? Fermenter(s)? A Brewpot? Capper? Caps? Hydrometer? Siphon hose? Bottle filler? etc etc...Haven't had a leinemkugels, but have had Blue Moon. Blue Moon is a Belgian style wit beer made with a little dried curacao bitter orange peel . . .
3/12/2008 -- On the directions to your kits it is stated that the beer will get better with aging. I've brew a few of your kits and I would like to know the proper way to age the beers. I've brewed the west coast blonde Ale, Diamond Knot IPA, Steadfast scottish Ale, and the Kangaroo Tail Ale.Thank You,John Newman
Response From Homebrew Heaven: With ALL beers, it is important to age them away from strong sunlight or florescent light. For ales (like those you brewed), room temperature storage is just fine. For lagers, it is BEST to let them sit at room temperature for at least 2-3 weeks, and then store them in a cool area, like a basement. 42-55 deg F is ideal for that. If . . .
2/19/2008 -- i purchased the brown ale, followed the directions but it's ben over 10 days and im still not getting any bubbles through the air lock. Beer temp is aprox 68 to70 degrees,what do you think?
Response From Homebrew Heaven: I think you should take a hydrometer reading. A hydrometer reading of your specific gravity will tell you what the condition of your beer is (done, still fermenting, not done etc), so you can THEN decide what the next step is. Time does not do this. Specific gravity reading do. Bubbling is an indicator, but a hydrometer reading tells . . .
1/29/2008 -- hey guys short question for you. Looking to make a real light "cherry" beer. Something very summer and very refreshing. wanting to have a cherry flavor to it similar to sam adams cherrywheat and wondering what kit i should buy from you . Yours in brewing Ryan
Response From Homebrew Heaven: A good way to go is to buy the Wizard's Wheat Kit as a "base". To that, you can either add real cherries, or use out fruit flavorings when you bottle. This is REAL easy, and makes a nice cherry beer.Here are links to those products:http://store.homebrewheaven.com/Product793andhttp://store.homebrewheaven.com/Product133
1/26/2008 -- I live about an hour (if traffic is good) from the address on your website. Do you have an actual store or is everything here based solely online?
Response From Homebrew Heaven: Yes, we have an actual brick-and-mortar store in Everett, WA. People actually walk in and buy stuff!Our address is:Homebrew Heaven9109 Evergreen WayEverett, WA 98204Here is a video of our shop: http://www.youtube.com/watch?v=N1a5fKvv8XIHeck, you can actually call us on the phone, too! It's 425-355-8865. A person will . . .
9/23/2007 -- I ordered your Wizard wheat kit with the Wyeast 3068 yeast culture. I didnt really seem to find alot of info on useing the culture in the instructions. And this is my first time useing a culture. I am looking for the basic steps, Starting the culture 24 hours in advance? Does it need to be at room temp or cool when started?
Response From Homebrew Heaven: Alright. Take the liquid yeast pack, and feel around inside a bit. You will find there is a smaller, inner pouch inside of the larger one. The idea is to rupture that inner pouch. I do it by place the pack on a table, and the whacking it with the bottom of my fist. Other people do it differently, but the key is to just feel around afterwards . . .
6/25/2007 -- I am eager to bounce into the world of Home Brewing. What type of beer should I attempt to brew first, if I am a rookie at this? Should I attempt bottling first, then move onto kegging? Thanks, and Happy Brewing!
Response From Homebrew Heaven: Welcome to our world!The best of type of beer to make is the kind you like to DRINK! All beers are made in a similar manner, so there is really no such thing as a "starter" beer. We encourage people to select a favorite beer style kit from our lineup in the Beer Ingredients (Recipe) section. Here is a link to that category:http://store.homebrewheaven.com . . .
1/25/2007 -- My first brew! First fermentation took 3 days. Been in carboy now for 4 days - no more activity - so I took a hydrometer reading - now at 1.010 original was at 1.042. Could it be ready for kegging? Seems crazy fast. This is the American Pilsner by the way. Great site!
Response From Homebrew Heaven: Why worry? Hydrometers don't lie. It may seem crazy fast to you, but it happens all the time. Fermentation time doesn't mean diddly. Hydrometer readings do. Lots of commercial breweries are on a 7 day brew-to-keg schedule.It's ready to keg!
1/15/2007 -- I just brewed your St. Pete's Pilsner, needless to say, I'm getting impatient waiting to try it. But my question is as follows: I would like to know the weights of the malts, grains, hops, irish moss, and yeast used to make batch. Could you inform on that? I am trying to keep a record and I failed to do that myself. Thanks.
Response From Homebrew Heaven: Sorry. That is something that we do not do. Our kits are proprietary recipes of Homebrew Heaven. We are justifiably proud of them, having won many awards and honors. Even commercial breweries have asked us for our recipes, and we've given the same answer.
1/8/2007 -- I just brewed my first batch (St. Peter's Pilsner) and I think my impatience got the best of me. I placed the primary fermentor in my basement with a room temp at 55 degrees (approx. 6 days). I misread the directions as to when to switch the beer into the secondary fermentor. There was one bubble every 40 seconds, I didn't wait for the . . .
Response From Homebrew Heaven: Absolutely NO reason for concern here.We give time guidelines like "one bubble per minute" reluctantly, and the only reason we do it is because people insist on using a clock as a measure of how "done" their beer or wine is. They hate using a hydrometer. Clocks are more familiar, I guess. It is completely an artificial yardstick. Yeast . . .
1/6/2007 -- My batch of Vanilla Wiezen has been in the secondary fermenter for about a week now and I have not seen any bubbling. Is it possible that all the fermentation took place in the primary? What kind of reading am I looking for in the Wiezen prior to bottling? My first reading was 1.042. Thanks for the help.
Response From Homebrew Heaven: Yes, it is entirely possible. This is the time to take an "ending gravity" reading, using your hydrometer and test jar. This reading should be (approx. 1.008 -1.014), according to your instructions for this kit.
1/3/2007 -- I see you get questions refering to this quite a bit. After 3 days we haven't seen any bubbling, and I made sure my seal was good again after reading, and it seems to be. I still ask because we had to alter the procedure a little to accommodate our indoor equipment. I could only use 2 gallons of water initially, but other than that followed . . .
Response From Homebrew Heaven: Yes, we do get these kind of questions. People are anxious about their new hobby, and usually just want some assurance that they haven't screwed it up. That is SELDOM the case.I will assume that the yeast was added after all the water was in there, AND that you ruptured the inner pouch on the yeast pack, and allowed it to swell up. If . . .
12/30/2006 -- I have started brewing a batch of Shamrock Irish stout, it has been 72 hours and I have seen minimal productivity in the primary fermenter (1 major bubble from the air lock). The temp in the area of fermantation is approx. 68 degrees, my starting SG was 1.046, i am worried that nothing is occurring. should I transfer to carboy or take a reading . . .
Response From Homebrew Heaven: Worrying never improved a beer.My guesses at this point (in order):1) The fermentation already occured, you just missed it2) The lid on your primary fermenter is not sealed 100%A hydrometer reading will tell you what is up.There is no harm in opening up your bucket, and siphoning off a sample into your hydrometer test jar. . . .
11/5/2006 -- I live in Seattle, can I come and pick up the bottles in Everett? Do you have a "brick and mortar" store?
Response From Homebrew Heaven: You sure can. It is literally made of bricks and mortar, in South Everett. Our address is:Homebrew Heaven9109 Evergreen WayEverett, WA 98204425-355-8865Hours are 10-6:30 M-F and 9:30-5 on SaturdaysHere is a video of the place:http://www.youtube.com/watch?v=N1a5fKvv8XITake a look around!
7/21/2006 -- I am a first time brewer and pretty new to all of this. I have ordered the wizard wheat recipe and have this question. When do I add the honey and does that change my intial readings because of the change in alcohol content?
Response From Homebrew Heaven: Honey can be added at the very end of the boil, or even directly to the primary fermenter after fermentation starts. Both will work just fine. Adding it to the boil, of course, sanitizes the honey which is good, if your honey is "raw" or unpasteurized. If it is pasteurized, I like to add it to the fermenter after fermentation starts. The . . .
4/9/2006 -- With your recipe kits, what would happen if i added the hopped extract to the water in the at the same time i added the specialty grains and started heating? I don't really like moving 6 gallons of boiling water off a cooker to prevent scorching the extract and thought adding the extract right at the start would help.
Response From Homebrew Heaven: You can do that, however the dry malt extract will take a while to fully dissolve in the cold water. You will find that dry malt extract tends to float on the top of the water until it dissolves, therefor scorching is less of a problem than with liquid (syrup) malt extracts that fall to the bottom.
4/8/2006 -- What type of yeast do you recommend for the wizard wheat kit? What yeast option do i get if I order the deluxe brewing kit with the wizard wheat?
Response From Homebrew Heaven: It really depends on your tastes. The dry yeast that comes with the kit makes an excellent beer. I would call this an American style wheat beer. If you want the more pronounced banana-clove flavor or a true German style hefeweizen, then go for the Wyeast #3068 liquid yeast culture.If you order the Wizard's Wheat with the Deluxe Brewing . . .
3/26/2006 -- I brewed Procrastinator Bock at the end of last year, and I'm really enjoying the fruits of my labor. I'm down to about 12 bottles... :( Anyway, I want to brew another batch, but I'm ready to try a little bit of manipulation of the original recipe in order to tweak it. Do you have the original recipe quantities so I can modify it slightly? . . .
Response From Homebrew Heaven: That's one thing we don't do (give out our recipes). Sorry. We have put a lot of development "work" (fun actually) into our kits, and many people, other brewshops and even commercial breweries have tried to copy them. It doesn't make business sense to release that information. They are tried and true, they are our products, and we're proud . . .
3/26/2006 -- Delayed fermenting question...For three days, my IPA was happily bubbling along when we got a cold snap.. Then there was a decrease in fermenting for a good 2 days or so, even though I moved the primary fermenter inside from the garage. Will this affect taste adversely? Should I rack it into the secondary fermenter earlier/later or anything? . . .
Response From Homebrew Heaven: The most common question we get is:"My beer/wine is not fermenting (according to the schedule) like I think is should...is it ruined?" People think it is either fermenting too slow or too fast, or has stopped prematurely or won't quit fermenting (again,... according to their schedule). This question falls into the same category. My . . .
2/20/2006 -- I just finished the ESB kit. When I put the wort into the primary I had to add water in order to bring the level up to 5 gallons. So I added the water and took a SG reading and only got about a 1030 reading. Do you think that I grabbed some of the water in my sample and that is why the reading is low?Is there anything I should do now? . . .
Response From Homebrew Heaven: Absoutely. Even if you stir it well, it will not completely mix, and will give you low readings. It does not affect your beer, however. No need to do anything.
9/6/2005 -- I have read a few recipes that mention adding honey to the end of the boil. Aside from flavor and increase alcohol content can honey be added to most recipes???
Response From Homebrew Heaven: Yes. I wouldn't exceed about 2-3 lbs in 5 gallons, however.
8/31/2005 -- will the liquid yeast survive shipping cross-country? when i've shopped at a local store, they've always given me my liquid yeast on ice. just curious...
Response From Homebrew Heaven: Yes, it will make it. If you are concerned, you can order a frozen gel pack to go with it. Our (Wyeast) XL cultures are much more stable than some other brands.
8/7/2005 -- I just started and this is the first beer I have brewed. Being a beginner, I of course made a mistake. I didn't put in the Irish Moss, but everything else I did according to the directions. What kind of effect will this have on the beer?
Response From Homebrew Heaven: Very minor; not to worry.Irish moss is a natural clarifier. It aids clearing by causing proteins to settle out prior to bottling. The worst you may notice is that when you chill your beer, you get a slight haziness (called chill haze), but it will not affect the flavor of your beer at all.
5/21/2005 -- I am brewing Wizards Wheat and it is currently in the primary fermentation phase. I tested w/a hydrometer roughly 11 hours into fermentation to check progress and it has reached finishing gravity. I have watched the temperature closely. Is this unusual? Can I start secondary fermentation? Love the site, ya'll are runnin a great business.
Response From Homebrew Heaven: It's a little unusual, but it happens. You must have provided a friendly enviroment for the yeast. Finishing quickly is a GOOD thing!If the specific gravity is down below about 1.013, I would go ahead and put it into the secondary fermenter. You can expect some more "crud" to fall out, and that too is good. I would let it sit for 4-10 . . .
5/16/2005 -- i just asked a question but forgot to ask about your kits. Do the kits come with all the ingredients that i need or do i need to buy other ingredents to make my beer? and thanx again,i noticed that you don't try to sell people needless products when they ask you questions about home brewing. you just want to help people make better beer at . . .
Response From Homebrew Heaven: Homebrew Heaven Ingredient Kits come with everything you need except water; they are pre-measured, and ready to go with complete instructions. Thank you for your comment; we try to be helpful. In the long run, that is best for home brewers, and best for our business as well.
2/9/2005 -- I am about to brew some wizards wheat with the liquid yeast. I use a 5 gal carboy with a blow off tube as my primary fermenter. From past experience, I will lose about a quart or more of beer from the blow off process. Should I top off when I rack to the secondary? Will this water down the beer? I have read the blow off takes out some . . .
Response From Homebrew Heaven: If you are using Wyeast 3068 strain, my experience is that you will lose a lot more than a quart. It is a VERY active fermenter! There is no problem with toping off with water when racking to the secondary, but yes, it does water it down slightly. Yes, a 6 gallon carboy would be better.
2/4/2005 -- I am making wizard's wheat with the liquid yeast and the wort/young beer has been in the primary fermenter for 6 days now. As I stated in an earlier post, during the first 24 hours the fermentation was incredibly explosive and left a very dense head of foam on top of my "young beer". Ever since then, the bubbling began to subside from once . . .
Response From Homebrew Heaven: Again, this sounds normal enough. Those clumps will eventually settle out themselves, either in the primary fermenter or in the secondary. It's almost like they are "social", grouping together into colonies. When they is no more sugar to consume, they will die off and fall to the bottom.
2/1/2005 -- Me and some friends cooked up a batch of your wizards wheat. About 24 hours later( after we put it in the primary) it started to foam out of the air lock and all over the place, it even blew off the top two peices of the air lock. Every time I put the airlock back on, it would just blow off from all the foam. The only thing I could think of . . .
Response From Homebrew Heaven: This is the result of good fresh healthy yeast, and an ideal fermentation environment (a GOOD thing!). Your beer will finish sooner, and it will ferment more completely. You did the right thing. This happens quite a bit when using the Wyeast 3068 strain of yeast. It is very active indeed!The idea is to either use a large enough primary . . .
1/31/2005 -- On Saturday afternoon I brewed my first batch of beer using the Wizard's Wheat kit. I have a question regarding Wyeast's 3068 yeast fermenting behavior. After I cooled the wort down to below 80 degrees by using a wort chiller, I oxygenated the wort using a pure 02 oxygenation system for 60 seconds or so. I pitched the yeast (which is less . . .
Response From Homebrew Heaven: Absolutely normal. This is the most active strain of yeast I know of. It is EXTEMELY aggressive.
11/2/2004 -- My friend and I have recently purchased your Belgian Ale kit. We followed all the proper steps to ensure a good brew, things were going well until the onset of Hurricane Ivan. Our brew was in the first stage primary fermentation. It has been there for a little over a month and a half. Can we proceed normally from here and actually produce . . .
Response From Homebrew Heaven: A Hurricane is no match for BEER! Really, it should be fine.As long as the airlock remained in place, I would pick up and go with it. Now you know what to name it: Ivan's Belgian Ale.
8/19/2004 -- I have just moved my wizard's wheat from the primary after 36 hours. The bubbles were just over a minute apart before I moved it. Now 4 hours later they are almost 3 minutes apart. Should I expect more activity than that? If not would it be too soon to bottle only a day or so after moving to the secondary...?This is my first attempt . . .
Response From Homebrew Heaven: It sounds like you are right on track. No need to worry!The idea is to make sure your fermentation is completely done, it doesn't matter if it's 3 days or 3 weeks. Yeast cell don't wear watches.When the specific gravity is approximately 1.016 (or lower) THEN it is time to bottle.You are correct, home brewing is FUN, and it's easy . . .
7/16/2004 -- I have heard you need to age beers depending on the type you brew before you drink them. Is there any standard for this?
Response From Homebrew Heaven: Generally speaking, it takes about 10 days to 2 weeks for carbonation to develop in the bottles. After that, many beers are ready to drink (especially light ales, wheat beers, etc). Some, especially darker, heavier and well hopped beers benefit by aging. Barleywine (a beer style) should really age at least 6 months to be at it's best. . . .
5/16/2004 -- I noticed in the recipes from "Capturing Beer" that the author recommends using less bittering hops when brewing up a full 5 gallons (instead of boiling 2-3 gallons and adding water to the primary). Do you recommend tinkering with the bittering hops of your kits (St. Pete's, etc) when boiling up a full 5 gallons of wort in the brewpot?
Response From Homebrew Heaven: No. Our kits are designed for a full 5 gallon boil (or more). That is the best way to make beer, and that the way we recommend doing it. Using a concentrated wort (partial boil volume) doesn't properly utilize the hops (or malt) in the kit. It will still make good beer, but it is better to boil it all. Actually, I like to start with 6 . . .
4/9/2004 -- I have your St Peter's Pilsner kit but desire some info not found in kit. Two questions....Is there a full 5 lbs of the dry malt in the package ??What bitterness rating may I expect using your recipe exactly to the best of my ability ?? I've 8 years brew experience.
Response From Homebrew Heaven: The expected bitterness is 16 IBU's, but we don't give out the actual ingredients, weights etc for our Homebrew Heaven Ingredient Kits.
3/26/2004 -- I would like to buy your Wizard Wheat kit. I already have some fresh yeast at home in my fridge. My friend bought a kit at a local brew shop, and inadvertantly bought two containers of yeast He gave one to me (lucky me). Can I buy this kit with out the yeast?
Response From Homebrew Heaven: Nope; sorry. They are all pre-assembled with everything, including yeast. There is no harm in adding both packets, however, or saving one for your next batch. When someone orders a liquid yeast with this kit, we leave the dry yeast in anyway.
3/25/2004 -- I am returning to home brewing after about 10 years off - don't ask! I made several batches of a kit called something like "Irish Ale" which was suggested by the retailer where I bought my original supplies. It was amber colored and well received by all. My understanding was that pilzners and ales could be made without cooling, lagers and . . .
Response From Homebrew Heaven: Welcome back!There are two primary types of beer, ales and lagers, based on the type of yeast used to ferment them. Typically, lagers are the following styles:pilsnersbocksmarzen/oktoberfest/vienna beersAles have many different styles:stoutsporters weizenspale alesIPA'sbelgian alesThe above listing are generalities . . .
3/23/2004 -- I am a beginning homebrewer and I am trying to determine the Alcohol by Volume of your beer kits. How you you go about using the specific gravities (starting/ending) to determine the alcohol by volume?
Response From Homebrew Heaven: You can approximate the % alcohol by taking the starting gravity and subtracting the ending gravity. You then divide this value by 8.For Example:Start Gravity (OG) = 1.050Ending Gravity (FG) = 1.012Difference in gravity "points" = 3838 divided by 8 = 4.75% alcohol by volumeThis is a handy (easy) way to do it. There are other . . .
3/14/2004 -- This is my first beer brew. I have all of the items in the kit in order to brew. How much and when should I add fruit such as blackberries or cranberries in order to liven up the brew?
Response From Homebrew Heaven: A good time is during the primary fermentation. Just wait for it to start bubbling, and add the fruit. This ensures that it has enough time to ferment out all the sugars from the fruit.How much?? That's a tough question, and a matter of personal taste as well. It also depends on the fruit itself. For blackberries, I would start with maybe . . .
3/13/2004 -- 1. For a first time home brewer, is there a recipe that is cheap and easy, like only one thing to mix with the water? I want to have a test run to make sure I have the steps and the sterilization right, even if it makes a run of the Mill(er) style beer. I do not want to waste $30 on a good ale kit and turn it to vinegar as a learning experiment . . .
Response From Homebrew Heaven: 1. We try to make really, really EASY, and the first time success rate is 100%, as far as I can tell. I'd recommend our Back to Basics Ale Kit, tho, if you want to be cautious. It is only $22.50 and makes a very good beer. The instructions are good...they walk you thru step-by-step.Here is a link to it:http://www.nexternal.com/hombre/?Target=products.asp&ProductID=9562. . . .
2/29/2004 -- We are preparing to start our Wizard's Wheat. We'd like to give it a citrus flare. How can we introduce citrus to the batch?
Response From Homebrew Heaven: I would just add the juice of a lemon or lime, maybe two?, to the wort after the boil, and after the wort has cooled to room temperature. Sounds good to me!
2/24/2004 -- What is the length of the bazooka and what type of connection fitting does it have?My order arrived in 5 days (Oklahoma). I was really impressed with the packaging and instructions included with the Wizard Wheat kit. It's still fermenting!
Response From Homebrew Heaven: It is 12" in length, 1" in diameter. It has 1/2" NPT (male) threads that screw directly into our Thru-Wall Fittings.Glad to hear you like the looks and delivery of our Wizard's Wheat. It's an excellent beer!
2/20/2004 -- what ingredient kit do i have to buy thatsclose to the taste of coors light or bud light?
Response From Homebrew Heaven: That would be the American Pilsner Kit.Here is a link to it:http://www.nexternal.com/hombre/?Target=products.asp&ProductID=992
2/14/2004 -- I brewed wizards wheat 2 weeks ago today. Move it from the primary on day 5 and when I checked for air bubble through the airlock its just under 1 minute 30 seconds. I've had out of the sunlight at around 65 -65 degrees. I was thinking it was ready to bottle but seems like I have a way to go. Is this typical for this beer? This is my . . .
Response From Homebrew Heaven: This sounds very normal, and like it is almost ready to bottle. The way to know for SURE, however, is by taking a hydrometer reading. When it is appoximately 1.014, it is ready to bottle.
1/4/2004 -- I have started a batch of this beer (St Peter's Pilsner) and have the primary fermatation going in a cool place, but at what temparture should the secondary take place.
Response From Homebrew Heaven: The temperature difference between the primary phase and the lager phase should be roughly 10°F. I guess I'd say the ideal temperature would be 45 deg F., but remember, nothing is absolute. Brewing is both a science and an art! Lower temperatures will extend the time required to finish, but will result in a clean, soft finish that is characteristic . . .
12/27/2003 -- A while back you answered a question about adding blackberries to make a blackberry wheat. How about adding cranberries for a cranberry wheat?
Response From Homebrew Heaven: Heck yes. I've found that the only thing limiting you is fear and common sense. Thankfully, I have little of either. About the only advice I can give is add too little, rather that too much. Sneak up on the amount you use.FWIW, we plan to introduce a vanilla wheat beer kit soon. So much for common sense.
11/30/2003 -- Is it possible to modify this or any other recipe as to gain a higher gravity or alcohol content in a lighter ale?
Response From Homebrew Heaven: Yes, by adding more fermentable sugars to the boil. This is often done with corn sugar or malt extract. Corn sugar is ok within limits, but using too much will add a "cider-like" taste. Malt extract is a better choice, but it will add some color as well. With Belgian ales, it is common to use clear candi sugar (rock candi). This keeps the . . .
11/26/2003 -- I recently bought Shamrock Stout. The bubbles were down to under a minute within 2 days, which is when I transferred to the secondary carboy. The bubbles aren't apparent now... which leads me to believe I should add more yeast. The temperature was 78 f at initial yeast introduction, yet now I am concerned that the yeast was not good... . . .
Response From Homebrew Heaven: It sounds just fine to me. A fast, vigorous fermentation is a good thing! It indicates good, fresh yeast and ideal fermentation conditions. This kind of thing is more common in summer months, but it sounds like you have it in a warm place.I assure you that even if you don't see them, plenty of yeast are still in there. I would just let . . .
11/9/2003 -- What is the life span of the beer (period of expiration)
Response From Homebrew Heaven: Not very long at MY house! Seriously, tho, if you store your homebrew properly, it should last for at least a year. Some, like the heavier, darker beers just get better with age. I have had some that was over 4 years old and it was excellent!
10/12/2003 -- I FELT LIKE THE BREW KITS I'VE BOUGHT IN THE PAST LACKED A PUNCH (ALCOHOL CONTENT). WILL USING DME INSTEAD OF SUGAR LOWER THE ALCOHOL CONTENT? HOW STRONG SHOULD I EXPECT MY BEER TO BE BREWING YOUR KITS, I.P.A.AND ST.PETERS PILSNER, ALSO APPROXiMATELY HOW MUCH LONGER TILL DRINKABILITY OR CARBONATION THAN CORN SUGAR? THANK YOU FOR ALL YOUR HELP . . .
Response From Homebrew Heaven: Using DME in place of corn sugar will lower the alcohol content slightly, but I doubt if you could measure it. It is more a matter of finer bubbles, and additional flavor from the DME.Each of our Homebrew Heaven Ingredient Kits is designed to make a beer that is true to the style...in other words, it varies kit by kit. For example, the . . .
10/9/2003 -- Are the hops left in or are they removed prior to fermentation? Should they be placed in a mesh bag as the grain is?Thanks-Great site!
Response From Homebrew Heaven: With this kit, some of the hop pellets are actually in the dry malt extract and are added with the malt (no bag). The hops that are added later in the boil are also just thrown in and allowed to boil. Don't worry, the little bit of hop residue just falls to the bottom of the fermenter later on. Only the grains are put into a bag, because . . .
9/20/2003 -- I ordered some of this with the liquid yeast here recently. When in the initial brewing stage, I mixed in the liquid yeast as per instuctions, and 24 hours into the brew, I saw no action at all in the check valve, so I removed the check valve, and added the dry yeast I had that also came with the package. Upon entering the secondary fermentation . . .
Response From Homebrew Heaven: Nothing to worry about at all! I'm certain it will turn out just fine. Many people, when using liquid yeasts are unaccustomed to the longer "lag" time they experience comparded to dry yeasts. This is entirely normal.For your next batch, however, I would wait for the liquid yeast to kick in. It will, it just takes longer. You can avoid . . .
8/2/2003 -- What is the approx. amount of alcohol content in these beers? Just so I know what to expect when I brew it.
Response From Homebrew Heaven: The alcohol content varies with the beer kit. For the Golden Eagle, it runs about 4.5% ABV. Other beers, like the Procrastinator Bock, are higher; some, like the American Pilsner are lower. We try to keep the alcohol level appropriate to the style of beer.
7/17/2003 -- Can blackberry's be added to this kit to make a blackberry wheat alternative? cups of juice or berries? Do I need to eliminate some of the sugars?
Response From Homebrew Heaven: You bet! I would go with about a pound or so (maybe 1.5 lbs)of crushed juicy berries. Add them to the primary fermenter, not the brewpot.There is some sugar in the berries, but it will just get converted to alcohol/CO2, so no need to worry about sweetness.
is currently empty