From Jack Rodgers of Ketchikan, Alaska on 3/17/2013.
Easy to use!
From Dean Hansen of Sedro Woolley, Washington on 8/14/2012.
Much easier to use than floating therm. Seems to be accurate. Just clip on brew kettle, and fermenting pail and read. Good product!
From Anonymous of Erath, Louisiana on 5/10/2012.
This really came in hand I love the long stem makes it very easy to get a reading and the thermometer is easy to read anyone can do, so you should consider this one!
hands free !!!!
From yeastie boy of Great Falls, Montana on 1/20/2012.
great thermometer!!! easy to read [even for old blind dudes]. clip is nice.length a plus for concentrated boils. this is a must for all of us!
Highly Recommended Product
From Preston Lane of Eugene, Oregon on 8/15/2011.
The stainless steel thermometer works as advertised. Clip holds it securely and is easily adjustable.
3/3/2012 -- The best way I know to calibrate a thermometer is to set it into a cup of ice-water then adjust to 32F. This thermometer does not have 32F marked though - and even though it say sit is in 2 degree increments it does not add up in the picture. Looks more like 4 degree increments.
Response From Homebrew Heaven: You are correct. It is in increments of 4 deg F. Actually, in our short description it said 4 deg, but in our detailed description it said 2 deg. Confusing, I know.Our apologies. The website description now reads 4 deg increments in both places. Thanks for the heads up!
5/17/2010 -- what is your phone number?
Response From Homebrew Heaven: We can be reached at (425) 355-8865Our toll free order is (800) 850-2739
2/7/2009 -- 1: I have a digital lazer thermometer that I use for checking the surface temperature of grills and pans. If I point it at the surface of the wort or side of the pot will I get an accurate reading??? Or should add a different one to my order??P.S. I'd rather not buy anything more that I don't have to.
Response From Homebrew Heaven: Yes, it should work pretty well, but could get confused by shiney surfaces, like the side of your brewpot.
1/26/2008 -- I live about an hour (if traffic is good) from the address on your website. Do you have an actual store or is everything here based solely online?
Response From Homebrew Heaven: Yes, we have an actual brick-and-mortar store in Everett, WA. People actually walk in and buy stuff!Our address is:Homebrew Heaven9109 Evergreen WayEverett, WA 98204Here is a video of our shop: http://www.youtube.com/watch?v=N1a5fKvv8XIHeck, you can actually call us on the phone, too! It's 425-355-8865. A person will actually answer as long as it's business hours!
11/5/2006 -- I live in Seattle, can I come and pick up the bottles in Everett? Do you have a "brick and mortar" store?
Response From Homebrew Heaven: You sure can. It is literally made of bricks and mortar, in South Everett. Our address is:Homebrew Heaven9109 Evergreen WayEverett, WA 98204425-355-8865Hours are 10-6:30 M-F and 9:30-5 on SaturdaysHere is a video of the place:http://www.youtube.com/watch?v=N1a5fKvv8XITake a look around!
9/5/2006 -- Will this clip on to a modified sanke keg?
Response From Homebrew Heaven: It depends on how it is modified, but it is intended for a straight-sided brewpot.
4/26/2005 -- Is the stem 9 inches or 12 inches??? There seems to be a conflicting info. Thanks.
Response From Homebrew Heaven: Sorry for the confusion. It is actually a 12" stem. We HAD some that were 9" for a while, and we got confused!
12/31/2004 -- Does it comes with celsius degrees? ºC.
Response From Homebrew Heaven: No; sorry. It is only in deg F.
11/21/2003 -- What is the temp range & how accurate?
Response From Homebrew Heaven: The range is from 0-220 deg F.The resolution (smallest increment on the dial) is 2 deg G. You can probably read in between the two increments, but +/- 1 deg accuracy is pretty hard to achieve.
is currently empty