STORE ADDRESS:
Homebrew Heaven
9109 Evergreen Way
Everett, WA 98204

425-355-8865

brewheaven@aol.com

Returning Customer?

Homebrew Heaven Shipping Policy

ORDERING POLICY

In case we are unable to reach you via phone, voicemail, and/or email and we have not received a response from you within 2 business days after attempting contact, we reserve the right to process your order with reasonable substitutions, (i.e.; pellet vs. leaf hops) unless you have specifically advised us not to, when you originally placed your order. Please note that SOME orders may be subject to cancellation if we have not received a response from you within 3 business days. 5 days for PayPal orders.

Homebrew Heaven uses a safe and secure ordering system over the Internet. If you are uncomfortable with providing your credit card information over the web, you can always print the contents of your shopping cart by highlighting ALL items in the cart (including order total) and either fax, or snail mail your order in to us. Be sure to include your personal check or money order. Please note that orders received with personal checks are subject to additional delay until the check clears and funds are available to Homebrew Heaven.

SHIPPING POLICY

Homebrew Heaven strives to ship all orders within 2 to 3 Business days from receipt. If we happen to be out of an item, we will make every effort to contact you regarding reasonable substitutions, backorders, etc. Again, we want HAPPY customers. SEE ORDERING POLICY.

You will automatically receive a confirmation of your order, and you can print out a copy for your records.

SHIPPING POLICY: Homebrew Heaven strives to send your package in the best, and most economical way possible. Within the U.S., this is normally by FEDEX or U.S. (Priority) Mail. You may now select the service that is right for YOU. We do NOT send packages COD, or invoice for shipments.

Orders to APO's/FPO's and PO Boxes MUST use U.S. Priority Mail. Due to security issues, package tracking is not available to these addresses. FEDEX and UPS do not deliver to these addresses, anyway. Any lost packages or damaged products via U.S. Mail to APO's/FPO's cannot be replaced.

OUTSIDE the U.S.: Normally, we use Fedex International Economy service. We have found that low cost surface mail is often unreliable. If you request these services, we will adjust the shipping and rates accordingly, but will NOT be responsible for non-delivery. We cannot guarantee delivery of any orders outside of the U.S. in any case.

LARGE and Heavy Items:
Some items, such as Fruit Presses and Grape Crusher/Destemmers MUST be sent by commercial truck, and can be expensive. We will be happy to provide an estimate on those items if you like. The shipping estimate on the website may have to be adjusted on these items. Shipments of these items are to U.S. addresses only.

HOLIDAY GIFTS: Our website allows you to specify a different "ship to" address, so that we can ship your gifts directly to the recipient. If you want us to send a copy of the invoice to you, instead of putting it into the box, just let us know in the "comment" section at checkout.

All shipping rates are subject to change at any time. We may be required to make adjustments for unusually bulky or heavy items, and orders that require more than one box. We make every effort to be fair about this, but sometimes it may be necessary.

Return Policy

The Shopping Cart is currently empty

Can't Check Out?
$15 min. Products Required.
10% discount on merchandise totals over $250 per order. Applies to online orders only.

HACKER SAFE certified sites prevent over 99% of hacker crime.

Current Category:

BEER INGREDIENT (RECIPE) KITS

Advanced Search

Navigate:

StoreFront / Beer Brewing / Beer Ingredient (Recipe) Kits / Hop Goblin Pumpkin Ale

Hop Goblin Pumpkin Ale

AVAILABLE: SEP thru NOV - Hop Goblin is a frightfully delicious spiced holiday ale, medium bodied, bright amber with a perfect balance of Hallertauer hops...without bein

Notify Me Upon Availability

Price: $27.95

Sold Out

SKU:

H34

View Enlarged Image

CUSTOMER REVIEWSCUSTOMER QUESTIONSDetails

Read Complete Questions & Answers | Ask a Question

2/18/2010 -- I have my stout in the primary, just about to transfer to the secondary. I added oats to the boil and am thinking about putting some coffee and a vanilla bean into the secondary. What would be the best way to do this and do you think it would be too much??

11/1/2009 -- I'd like to order a beer ingredient kit from your website but don't see the "Check-out" anywhere. Can you point me in the right direction please?

9/22/2009 -- I want to brew the Hop Goblin Pumpkin Ale but I can not do a full boil. Should I just forget abut brewing this beer, or can you let me know what to do for a partial boil

9/12/2009 -- Do you have the individual ingredients listed anywhere for your Hop Goblin Ale? I still have a pretty good supply of extract and hops around and your ale sounds real good, something I would like to try. Thanks.

9/3/2009 -- Is it possible to hop a bock beer more to give it a more balanced taste? and if so which hops would give such a end result? P.S. not a computer savvy guy, e-mail address is my wife cut me some slack on the name.

8/1/2009 -- I just finished my first batch of wheat beer and have transfered it to the primary, it's been about 28 hours and i've only noticed about 1 bubble per minute in the airlock. Is the yeast doing it's job or should I add another packet? Also a solid layer of sludge has formed on the surface of the beer, is this normal? Cheers!

9/7/2008 -- I am a big fan of your ingredient kits but have noticed that the selection has been very low lately. Why are some of your best ingredient kits no longer available?

4/27/2008 -- what are the pros and cons of the dry yeast included in your ingredient kits vs the optional wet yeast culture? i'm especially interested in whether one produces more alcohol over the other and viability of the yeasts after shipping, and i welcome any other info you care to share.

3/12/2008 -- On the directions to your kits it is stated that the beer will get better with aging. I've brew a few of your kits and I would like to know the proper way to age the beers. I've brewed the west coast blonde Ale, Diamond Knot IPA, Steadfast scottish Ale, and the Kangaroo Tail Ale. Thank You, John Newman

2/19/2008 -- i purchased the brown ale, followed the directions but it's ben over 10 days and im still not getting any bubbles through the air lock. Beer temp is aprox 68 to70 degrees,what do you think?

1/26/2008 -- I live about an hour (if traffic is good) from the address on your website. Do you have an actual store or is everything here based solely online?

6/25/2007 -- I am eager to bounce into the world of Home Brewing. What type of beer should I attempt to brew first, if I am a rookie at this? Should I attempt bottling first, then move onto kegging? Thanks, and Happy Brewing!

1/25/2007 -- My first brew! First fermentation took 3 days. Been in carboy now for 4 days - no more activity - so I took a hydrometer reading - now at 1.010 original was at 1.042. Could it be ready for kegging? Seems crazy fast. This is the American Pilsner by the way. Great site!

1/15/2007 -- I just brewed your St. Pete's Pilsner, needless to say, I'm getting impatient waiting to try it. But my question is as follows: I would like to know the weights of the malts, grains, hops, irish moss, and yeast used to make batch. Could you inform on that? I am trying to keep a record and I failed to do that myself. Thanks.

1/8/2007 -- I just brewed my first batch (St. Peter's Pilsner) and I think my impatience got the best of me. I placed the primary fermentor in my basement with a room temp at 55 degrees (approx. 6 days). I misread the directions as to when to switch the beer into the secondary fermentor. There was one bubble every 40 seconds, I didn't wait for the one bubble/minute or less. Is it ruined or is there something . . .

1/6/2007 -- My batch of Vanilla Wiezen has been in the secondary fermenter for about a week now and I have not seen any bubbling. Is it possible that all the fermentation took place in the primary? What kind of reading am I looking for in the Wiezen prior to bottling? My first reading was 1.042. Thanks for the help.

1/3/2007 -- I see you get questions refering to this quite a bit. After 3 days we haven't seen any bubbling, and I made sure my seal was good again after reading, and it seems to be. I still ask because we had to alter the procedure a little to accommodate our indoor equipment. I could only use 2 gallons of water initially, but other than that followed everything else exactly. We also used the Wyeast Scottish . . .

12/30/2006 -- I have started brewing a batch of Shamrock Irish stout, it has been 72 hours and I have seen minimal productivity in the primary fermenter (1 major bubble from the air lock). The temp in the area of fermantation is approx. 68 degrees, my starting SG was 1.046, i am worried that nothing is occurring. should I transfer to carboy or take a reading first and then transfer? also, what's the best procedure . . .

4/9/2006 -- With your recipe kits, what would happen if i added the hopped extract to the water in the at the same time i added the specialty grains and started heating? I don't really like moving 6 gallons of boiling water off a cooker to prevent scorching the extract and thought adding the extract right at the start would help.

3/26/2006 -- I brewed Procrastinator Bock at the end of last year, and I'm really enjoying the fruits of my labor. I'm down to about 12 bottles... :( Anyway, I want to brew another batch, but I'm ready to try a little bit of manipulation of the original recipe in order to tweak it. Do you have the original recipe quantities so I can modify it slightly?

3/26/2006 -- Delayed fermenting question...For three days, my IPA was happily bubbling along when we got a cold snap.. Then there was a decrease in fermenting for a good 2 days or so, even though I moved the primary fermenter inside from the garage. Will this affect taste adversely? Should I rack it into the secondary fermenter earlier/later or anything? Or toss the whole batch and start fresh? Thanks . . .

2/20/2006 -- I just finished the ESB kit. When I put the wort into the primary I had to add water in order to bring the level up to 5 gallons. So I added the water and took a SG reading and only got about a 1030 reading. Do you think that I grabbed some of the water in my sample and that is why the reading is low? Is there anything I should do now? The batch seems to be bubbling away nicely.

8/7/2005 -- I just started and this is the first beer I have brewed. Being a beginner, I of course made a mistake. I didn't put in the Irish Moss, but everything else I did according to the directions. What kind of effect will this have on the beer?

5/16/2005 -- i just asked a question but forgot to ask about your kits. Do the kits come with all the ingredients that i need or do i need to buy other ingredents to make my beer? and thanx again,i noticed that you don't try to sell people needless products when they ask you questions about home brewing. you just want to help people make better beer at home.

11/2/2004 -- My friend and I have recently purchased your Belgian Ale kit. We followed all the proper steps to ensure a good brew, things were going well until the onset of Hurricane Ivan. Our brew was in the first stage primary fermentation. It has been there for a little over a month and a half. Can we proceed normally from here and actually produce a good product or should we consider this batch- botched and . . .

5/16/2004 -- I noticed in the recipes from "Capturing Beer" that the author recommends using less bittering hops when brewing up a full 5 gallons (instead of boiling 2-3 gallons and adding water to the primary). Do you recommend tinkering with the bittering hops of your kits (St. Pete's, etc) when boiling up a full 5 gallons of wort in the brewpot?

4/9/2004 -- I have your St Peter's Pilsner kit but desire some info not found in kit. Two questions.... Is there a full 5 lbs of the dry malt in the package ?? What bitterness rating may I expect using your recipe exactly to the best of my ability ?? I've 8 years brew experience.

3/25/2004 -- I am returning to home brewing after about 10 years off - don't ask! I made several batches of a kit called something like "Irish Ale" which was suggested by the retailer where I bought my original supplies. It was amber colored and well received by all. My understanding was that pilzners and ales could be made without cooling, lagers and stouts required cooler temps. (50 deg or so). . . .

3/23/2004 -- I am a beginning homebrewer and I am trying to determine the Alcohol by Volume of your beer kits. How you you go about using the specific gravities (starting/ending) to determine the alcohol by volume?

3/13/2004 -- 1. For a first time home brewer, is there a recipe that is cheap and easy, like only one thing to mix with the water? I want to have a test run to make sure I have the steps and the sterilization right, even if it makes a run of the Mill(er) style beer. I do not want to waste $30 on a good ale kit and turn it to vinegar as a learning experiment when I could just waste $5 of malt syrup! I have . . .

2/20/2004 -- what ingredient kit do i have to buy thats close to the taste of coors light or bud light?

1/4/2004 -- I have started a batch of this beer (St Peter's Pilsner) and have the primary fermatation going in a cool place, but at what temparture should the secondary take place.

12/27/2003 -- A while back you answered a question about adding blackberries to make a blackberry wheat. How about adding cranberries for a cranberry wheat?

11/30/2003 -- Is it possible to modify this or any other recipe as to gain a higher gravity or alcohol content in a lighter ale?

11/26/2003 -- I recently bought Shamrock Stout. The bubbles were down to under a minute within 2 days, which is when I transferred to the secondary carboy. The bubbles aren't apparent now... which leads me to believe I should add more yeast. The temperature was 78 f at initial yeast introduction, yet now I am concerned that the yeast was not good... Should I add another packet now, or am I thinking too much about . . .

11/9/2003 -- What is the life span of the beer (period of expiration)

10/12/2003 -- I FELT LIKE THE BREW KITS I'VE BOUGHT IN THE PAST LACKED A PUNCH (ALCOHOL CONTENT). WILL USING DME INSTEAD OF SUGAR LOWER THE ALCOHOL CONTENT? HOW STRONG SHOULD I EXPECT MY BEER TO BE BREWING YOUR KITS, I.P.A.AND ST.PETERS PILSNER, ALSO APPROXiMATELY HOW MUCH LONGER TILL DRINKABILITY OR CARBONATION THAN CORN SUGAR? THANK YOU FOR ALL YOUR HELP TODAY PLANNING ON ORDERING MY EQUIMENT AND BEER KITS AFTER . . .

9/20/2003 -- I ordered some of this with the liquid yeast here recently. When in the initial brewing stage, I mixed in the liquid yeast as per instuctions, and 24 hours into the brew, I saw no action at all in the check valve, so I removed the check valve, and added the dry yeast I had that also came with the package. Upon entering the secondary fermentation stage, there seems to be a slightly different odor than . . .

8/2/2003 -- What is the approx. amount of alcohol content in these beers? Just so I know what to expect when I brew it.

Read Complete Questions & Answers | Ask a Question