Security Seals
1/2" Stainless Ball Valve

Fittings and Valves

Beer Brewing / Brew Kettles, Fittings & Stuff / Fittings and Valves RSS Feed
Navigate:  StoreFront / Beer Brewing / Brew Kettles, Fittings & Stuff / Fittings and Valves
We carry a wide range of brass and stainless fittings for your brew kettle and home brewery.
Fittings and Valves
Installed Spigot in Kettle
In Stock
Free installation when you purchase this kit and one of our pots. Includes a thru-wall fitting, ball valve and stainless nipple to connect the two. Thru wall ftg Requires a 1.062 inch hole if you are installing at home.
$24.70 - $35.40 Price Details
Select Options
bulkhead fitting stainless steel
In Stock
Same as above, but 304 STAINLESS! Purchase this fitting along with any pot we sell and we will install it for no additional fee---just tell where you want it in the "Fitting Placement" section. Otherwise, we will just use common sense. Uh oh!...
$16.95
Select Options
Thru-Wall (Bulkhead) Fitting  - Brass (1/2" Npt)
In Stock
With any brewpot here, we'll install this weldless fitting for FREE!---just tell where you want it in the "Fitting Placement" section. We'll do it for you. Otherwise, we will just use common sense. Uh oh!...
$9.95
Select Options

ball valve for homebrew kettles
In Stock
Top quality stainless ball valve. Has 1/2" NPT (female) threads on each end.
$18.95
- + Add To Cart
brass ball valves
In Stock
1/2" Npt Brass Ball Valve for brewpots or any application needing flow control. Same ball valve that is in our brewpot spigot kits.
$10.25
- + Add To Cart
compression
In Stock
3/8" x 1/2" Npt Compression fitting used to connect our Stainless False Bottoms to the thru-wall fitting.
$3.95
- + Add To Cart

compression fitting
In Stock
1/2" Male pipe thread x 1/2" compression fitting. Mainly used to construct false bottoms for mash tuns. Tubing to be insterted in compression side should preferrably be made from stainless steel.
$11.95
- + Add To Cart
2" Tri Clamp
In Stock
Used for connecting tri clamp fittings. Also works well with our Ferrule Fitting for customizing fermentors or making your own distillation column.
$16.95
- + Add To Cart
stainless t fitting
In Stock
Stainless Steel T fitting used for building your own homebrewery. This "T" fitting has 1/2" FPT.
$4.50
- + Add To Cart

2" Ferrule
In Stock
Made from 304 Stainless Steel. This 2" Ferrule can be welded onto a kettle, fermenter, or even used to build a distillation column. Compatable with 2" Tri-clamps (aka: clover clamp)
$16.95
- + Add To Cart
Stainless 90° Elbow With 1/2" Threads
In Stock
Stainless steel 90 degree elbow for connecting stainless pipe or attaching threaded nipples. Used for building your own brewery..
$4.25
- + Add To Cart
316 Stainless Ball Valve
In Stock
Can be fully disassembled for cleaning and replacing seals. Top quality ball valve for those who want the best.
$23.95
- + Add To Cart

plug for 1/2" npt hole
In Stock
Threads into the hole in our 1/2" NPT Thru Wall Fittings when not in use with a ball valve or thermometer. Comes in either brass or stainless steel
$3.95
Select Options
stainless steel street elbow
In Stock
This stainless steel street elbow has 1/2" female pipe threads on one end and 1/2" female threads on the other. It has a 90 degree bend.
$4.50
- + Add To Cart
brass brewpot fitting
In Stock
Often used on the "out" side of our brewpot spigot kit. Allows connection of outflow hose (2 barb sizes available) by 1/2" pipe thread.
$3.25 - $3.75 Price Details
Select Options

Sight Glass Adapter.
In Stock
Stainless Steel Adapter for the 11" or 16" stainless steel + glass sightglass. 1/2 MPT for intallation into kettle and 1/8" FPT thread for the sight glass. Requires a thru-wall fitting or any other 1/2" NPT coupler for installation into your pot.
$15.95
- + Add To Cart
Stainless Steel Threaded Nipple
In Stock
Normally used for attaching ball valves into brewpots, This Stainless Threaded nipple can also be used to join two female hose sections. 1/2" Npt threads
$4.50
- + Add To Cart
stainless barb fittings
In Stock
Great for use with full stainless boiling, mashing, sparging setups. All stainless steel barbed fittings for both 3/8" and 1/2" ID tubing sizes.
$5.99 Price Details
Select Options

threaded coupler
In Stock
Do your own welding with these couplings. 1/2 NPT internally (female) threaded. Allows you to screw in accessories like spigots, thermometers, false bottoms etc. Outside diameter is 1 1/16" (1.0625")
$4.95
- + Add To Cart
2" gasket
This gasket seals two connected tri clamp fittings. It is high temp so it works well with distillation columns as well.
$2.95
- + Add To Cart
425-355-8865
Returning Customer?
Privacy Policy Shipping Policy Return Policy
Shopping Cart
 

The Shopping Cart is currently empty

Shopping Cart by Nexternal




Can't Check Out?
$15 min. Products Required.
Security Seals